Top Gun Compass
#1
Registered
Thread Starter
Top Gun Compass
The compass on my boat has gone bad, (04) and I would like to put something else in it's place. Has anyone ever taken there's out and replaced with something other than a compass, if so, what and pics would be nice. Not a real need for a compass with GPS. Thanks in advance
#2
Registered
Join Date: Aug 2009
Location: Columbia, MO
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
I've seen some where it is removed & a plate is machined to fit over the hole with the Cigarette script or logo on the plate. That is what I'd try to do if I removed mine.
#4
Registered
Join Date: Feb 2003
Location: bluffton sc
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
My gps is not dash mounted. I was going to cut the hump out and get ,ew dash plate and flush mount my gps there. My compass is non functional, plus have another at nav station.
#5
i make these caps to update the dash. Eliminates compass and allows a better layout. Cut off the compass riser, remove the factory aluminum panels and it screws right on over the existing dash.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#7
Registered
Thread Starter
Not sure what aluminum panels you are talking about, and looks as if you did glass work to make it look finished. That looks a whole lot better though, very nice.
#8
Registered
Bear in mind that in Canada the rules require that boats over a certain length require a compass , you may want to check your state or federal regulations to be sure you are legal without a compass . GPS only work if you have power .
Just a thought .
RG.
Just a thought .
RG.
#10
the gauge panels, there should be two screw in panels that hold all the gauges. This cap covers all of that with no glasswork but you do need to do some wiring and stuff. Heres the raw panel
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 09-03-2014 at 04:20 PM.