Fire Extinguisher Holder
07-09-2018, 07:38 AM
#1
Registered
Thread Starter
Fire Extinguisher Holder
have a 1994 TG with fire extinguishers in the cockpit on starboard and port side. Long story short I had some dip**** friends break the plastic holder. Anyone know where I can find a replacement? These aren’t the fancy SS ones...and no I’m not buying the fancy SS ones lol
07-09-2018, 12:11 PM
#2
Charter Member # 55
Charter Member
Did you do the Kidde fire extinguisher recall?? They will send you new extinguishers with brackets.
I do still have my old ones. Not sure if they are the same as what you need??
I do still have my old ones. Not sure if they are the same as what you need??
07-10-2018, 09:42 PM
#4
Registered
Thread Starter
I looked on the Kidde website. Looks like they only sell whole fire extinguishers with brackets. Honestly looking for direct replacements. Trying to avoid drilling additional holes in the boat.
As an aside...I’m going to a no friends policy on the boat from now on. One friend dropped a mag flashlight on the deck, deep gouge in brand new paint. Another stood on the trailer light thinking it could support weight. Snapped the thing right off. Someone spilled mudslide on brand new snap in carpet. Now a broken extinguisher bracket. Like wtf.
As an aside...I’m going to a no friends policy on the boat from now on. One friend dropped a mag flashlight on the deck, deep gouge in brand new paint. Another stood on the trailer light thinking it could support weight. Snapped the thing right off. Someone spilled mudslide on brand new snap in carpet. Now a broken extinguisher bracket. Like wtf.
VIP Member
07-11-2018, 10:39 AM
#7
Registered
Thread Starter
07-11-2018, 09:38 PM
#9
Registered
Thread Starter
07-11-2018, 11:30 PM
#10
Charter Member # 55
Charter Member
The ones in the boxes I got from the recall.The brackets are pretty similar, but have a slightly larger diameter overall and at the neck and are shorter.
Measure the diameter of the base on yours and maybe one of them will work.
Measure the diameter of the base on yours and maybe one of them will work.
