KAAMA HELP!!!!!! Someone stole my props

[don]

Where can I get 2 17" or 18" 24pitch 1 left and 1 right rotation for my Kaama surface drives? Used id great for now untill I get the boat finished. Someone walked off with mine so I am needing a set.

[bigrob96976]

Try Archer Marine , Costa Mesa California

[screammachine]

Originally Posted by don

Where can I get 2 17" or 18" 24pitch 1 left and 1 right rotation for my Kaama surface drives? Used id great for now untill I get the boat finished. Someone walked off with mine so I am needing a set.

call me at 252 422 8854 if you are interested.

[cuda]

I must have been reading your mind. I just posted on the prop grease tube thread, and I was going to mention I always took off the Kaama props, because I haven't seen a set for years. The last set I saw for sale was for $2500, and that was at least five years ago. I don't know why someone would steal them, because as far as I know, they only fit a Kaama drive. You can buy adapters that you can put a bigger prop on with, but the adapters are $350 each, and it ain't like they give those props away either.

[Andy]

With the price of metals these days I bet if you checked with the local scrap metal dealers you may find them. What a HUGE pis$off!!!!!

[X-Rated30]

Originally Posted by cuda

I don't know why someone would steal them, because as far as I know, they only fit a Kaama drive.

Negative, dude. As long as you had yours, I would have thought you knew that they are the same size as the small shaft Speedmasters (#3 not #3A). I have seen 3 and 4 blades around. I believe (check this) they are the 19 spline and the large shaft is the 26 spline, but I sold mine so long ago I am not positive. Hope this helps.

[Car Biz]

Originally Posted by X-Rated30

Negative, dude. As long as you had yours, I would have thought you knew that they are the same size as the small shaft Speedmasters (#3 not #3A). I have seen 3 and 4 blades around. I believe (check this) they are the 19 spline and the large shaft is the 26 spline, but I sold mine so long ago I am not positive. Hope this helps.

Yup any 19 spline long hub speedmaster #3 or #4 will work.

[BOATMAN302]

i have some xtras but i thing they are too big. Did you call the guy in florida who had all those sets of correct props that i told you about 2 weeks ago.??????

[cuda]

Originally Posted by X-Rated30

Negative, dude. As long as you had yours, I would have thought you knew that they are the same size as the small shaft Speedmasters (#3 not #3A). I have seen 3 and 4 blades around. I believe (check this) they are the 19 spline and the large shaft is the 26 spline, but I sold mine so long ago I am not positive. Hope this helps.

You're probably right, and you are definelty right on the shaft size. I didn't know that a #3 prop would fit, but thing again, I don't ever remember seing a #3.

Mine were 16.5x26

[cuda]

You may want to call Galen here in Deland at Speedmaster's. I heard last night he may be closing. He might have some props, and I know he has the adapters.