1976 Mirage motor rebuild
#22
Registered
Join Date: Feb 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
The boats look really great! I'm usually not into classic and vintage but I love these!
_______________________________
Convert flac to mp3
_______________________________
Convert flac to mp3
#23
Registered
Thread Starter
Ok here are a few more pic's of before,as you can see it needs a good cleaning and definitely a paint job in the bilge and i hope to do by boating season,The exhaust i have is old school but it'll have to work till i can find others.The pipes are open at the ends i cant stand with the wind at my back soaks everyone on board going to weld closed with spitters on transom.Oh and the pic of the barn is why i get yeld at for how much it costs for this boat......Till we are flying across the lake that is......Still looking for the trim indicators that clamp on trim cylinders..The trans when i pulled it was a little wet i think the shaft seal may be leaking is that somthing i can replace ???? the trans works flawlessly...I'll post a few more pic's of the block numbers and head numbers and the crank and maby some ideas on what cam i should have would help.I love looking at all the boats of before and after so i thought i would post these.
#26
Registered
Thread Starter
I think i need a class from you mark in posting pic's.And if your that good post one of the barn done then i will send one with 1 of your fleet inside for storage.LOL...
#27
Registered
Thread Starter
I know we have a lot of snow here but I'm starting on boat again in time for spring.
I did last fall finish the motor rebuild I will get some photos up soon.still looking for saddles and clamps for the mechanical trim tubes for trs drives.
I did last fall finish the motor rebuild I will get some photos up soon.still looking for saddles and clamps for the mechanical trim tubes for trs drives.