#99 gentry 46' scarab restoratoin
08-05-2016, 12:23 PM
#233
Registered
08-10-2016, 09:05 PM
#234
Platinum Member
Platinum MemberThread Starter
Engine room is cleaned and finally ready for the 3rd engine. Drive decals turned out amazing
[ATTACH=CONFIG]558208[/ATTACH][ATTACH=CONFIG]558209[/ATTACH]
[ATTACH=CONFIG]558208[/ATTACH][ATTACH=CONFIG]558209[/ATTACH]
08-12-2016, 08:01 PM
#235
Platinum Member
Platinum MemberThread Starter
The Gentry 3 are installed just about ready for exhaust.[ATTACH=CONFIG]558255[/ATTACH]
The 3 Kiekhaefer Drives install with trim tabs [ATTACH=CONFIG]558256[/ATTACH][ATTACH=CONFIG]558257[/ATTACH]
And the new seat is done.[ATTACH=CONFIG]558258[/ATTACH]
The 3 Kiekhaefer Drives install with trim tabs [ATTACH=CONFIG]558256[/ATTACH][ATTACH=CONFIG]558257[/ATTACH]
And the new seat is done.[ATTACH=CONFIG]558258[/ATTACH]
VIP Member
08-15-2016, 03:01 PM
#237
Platinum Member
Platinum Member
Incredible build and attention to detail!
Question/observation - With all those fuel fills and vents on the deck, it seems like the crew would be constantly smelling and misted with gas with full tanks.
Question/observation - With all those fuel fills and vents on the deck, it seems like the crew would be constantly smelling and misted with gas with full tanks.
08-15-2016, 03:26 PM
#238
Registered
iTrader: (1)
Serious note, on my crappy computer it looks like a panel that hasn't been put down yet, but is resting on frt of boat during pic. I dunno.
08-15-2016, 04:10 PM
#239
Platinum Member
Platinum Member
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,748
Received 378 Likes
on
254 Posts
sorry to say this, but you are gonna have to dig in the trailer a little bit!!! Picture 2 Does not match the look of the boat at all!!!
Nicely done!!!
Nicely done!!!
08-15-2016, 04:56 PM
#240
Platinum Member
Platinum MemberThread Starter
The trailer goes in for its makeover after we lift the boat on to the dipster trailer that we had built for the boat that's under Smokin Joe right now. As for the fuel fills they are Dry Breaks they don't leak they are spring loaded and a pain to use stiff springs.
