Chine walk ?
#1
Registered
Thread Starter
Join Date: Sep 2012
Location: KUWAIT
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Chine walk ?
Are any of you experiencing any chine walking?
as i said in another thread, i have a 2005 27 pr powered by twin merc 200's. As soon as i hit 52 MPH i start to experience chine walk. just wondering if any other concept owners experienced this? and if you guys found a solution.
Thnx
as i said in another thread, i have a 2005 27 pr powered by twin merc 200's. As soon as i hit 52 MPH i start to experience chine walk. just wondering if any other concept owners experienced this? and if you guys found a solution.
Thnx
#2
Registered
Join Date: Nov 2003
Location: Virginia Beach, VA
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
definietly a prop issue, I have a 30 and have no issues with chine walking, I am pretty sure my props spin out, I have 23P Mirage but I will be switching to 22P bravo 4 blades winter
#5
Registered
Are any of you experiencing any chine walking?
as i said in another thread, i have a 2005 27 pr powered by twin merc 200's. As soon as i hit 52 MPH i start to experience chine walk. just wondering if any other concept owners experienced this? and if you guys found a solution.
Thnx
as i said in another thread, i have a 2005 27 pr powered by twin merc 200's. As soon as i hit 52 MPH i start to experience chine walk. just wondering if any other concept owners experienced this? and if you guys found a solution.
Thnx
#6
Registered
Join Date: Nov 2003
Location: Virginia Beach, VA
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
my motors are on the top hole, I think my tachs my read slightly high because I have seen 5900 or so, the motors are supposed to hit the rev limiter at like 5800-5850, I have seen 65.5 as my best, typically 62-63, I should drop some rpm when I go to 22P, 4 blades this winter