new fuel spout 95 Baja 272
#3
Registered
Are you putting in a locking one or quick fill?
#4
Charter Member # 55
Charter Member
ahhhhhhh, now I understand what you're asking.
You have to go from the inside if it was done right. One of the screws through the neck should be through bolted and have a ground wire from the tank attached. The hose also needs to be double clamped.
You have to go from the inside if it was done right. One of the screws through the neck should be through bolted and have a ground wire from the tank attached. The hose also needs to be double clamped.
#5
Registered
Thread Starter
Join Date: Apr 2007
Location: BROOKELAND,TX
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I Am Replacing The Whole Thing Since I Lost My Cap And Cant Find A Replacementthe One I Found Looks Just Like It But The Cap Threads Are Different So I Have To Pull And Replace The Whole Thing Instead Of Just The Cap I Pulled The Glove Box But Will Have To Drill Big Hole To Get To It Other Option Looks Like If I Tearout My Speaker And Part Of The Wall Looks Like I Could Get To It Just Wandered If Any Had Done This