Go Back   Offshoreonly.com > Technical > Do It Yourself, Boating on a Budget


OSO Sponsor
NorTech
OSO Sponsor

Advertiser

Advertiser


Reply
 
 
 
 
Thread Tools
Old 06-02-2009, 12:18 PM   #1
Registered
 
Poker&Run's Avatar
 
Join Date: Oct 2006
Location: Nashville, TN
Posts: 180
Active Thunder
Fuel Pressure Question

Setting fuel pressure on a 515cu efi motor. Needing to know what pressure should be set at idle. Running an aeromotive fuel setup. Was thinking around 43lbs but any help would be appreciated. Also, approx reading that I should be getting at WOT. Thx.
Poker&Run is offline   Reply With Quote
 
 
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 02:35 AM.


Copyright 2011 OffShoreOnly. All rights reserved.

Search Engine Optimization by vBSEO 3.2.0