jimmillman

http://www.facebook.com/#!/album.php...&id=1492527904

Dan Burger

Need to get this project rolling? time is a wasting!! Let me know if you need any assistance.

speedjunky 123

Check your PM's I returned your's regarding the crank pulley, I'd like to swap them soon for my own project, Thanks

jimmillman

Thanks to everyone for suggestions. I ended up taking the motor and Whipple side mount to Young Performance Marine (http://www.youngperformancemarine.com) in Old Hickory, Tennessee. He is the best resource for this setup. Hoping to squeeze 700Hp and over 800 Ft. Lbs. of Torque from it? http://www.youtube.com/watch?v=bZcBU7vclYU

jimmillman

http://www.youtube.com/watch?v=bZcBU7vclYU

jimmillman

Thanks to all for the help. I ended up taking it to Young Performance Marine in TENN. to get everything right the first time. We are aiming for 700 HP and 880 Ft. Lbs. I hope to be in the water by June, I miss boating....

bobsbillets

Just a F.Y.I. I have same setup 502 mag mpi with side mount whipple. Comp is 8.5:1. H.P. 500 EFI cam and made 725 h.p. and 790 tq at 5600.