broken bearing/bracket inside ITS
#1
Registered
Thread Starter
Join Date: Mar 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
broken bearing/bracket inside ITS
Hello,
I have a 2001 36 foot baja outlaw with twin 496, 500 horsepower with ITS factory mercury setbacks. After removing bottom inspection plate we can see a cracked bracket and failed bearing. Can I remove the setback boxes without pulling the motor (support motor and remove or will brackets or will motor stay in place if box is removed?) Does anyone know where I can get a schematic blow up or parts list for this integrated transom system setbacks? My serial number on my bravo outdrive is 0m231804 and there is a mercruiser smartcraft sticker. Thanks so much for any help anyone can provide.
~James
I have a 2001 36 foot baja outlaw with twin 496, 500 horsepower with ITS factory mercury setbacks. After removing bottom inspection plate we can see a cracked bracket and failed bearing. Can I remove the setback boxes without pulling the motor (support motor and remove or will brackets or will motor stay in place if box is removed?) Does anyone know where I can get a schematic blow up or parts list for this integrated transom system setbacks? My serial number on my bravo outdrive is 0m231804 and there is a mercruiser smartcraft sticker. Thanks so much for any help anyone can provide.
~James
#6
Offshoreonly Advertiser
Offshoreonly Advertiser
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired