from efi to carb ....engine wireing harness
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Are you talking about the boat harness or the engine harness?
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#7
Registered User
Gold Member
Join Date: Apr 2007
Location: prince george,va
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
i changed out mine frow
m efi to a carb set-up.my motor was a 94 mercuser,502mag,efi to a 502 carb set-up.i got a new harness from a local dealer.i used for refrance a 89-92 carb wireing harness.this was about110.00.i also changed the distributor to a msd and use a marine box.that was it.there was some minor wiring,but nothing major.everybody told me i was going to take big hit in fuel consuption....i lost something like .5gallon a mile,,,,,,,,a small price to pay for being able to have a boat that i can work on/trouble shoot.i am a old school kinda guy and dont know alot about efi.
m efi to a carb set-up.my motor was a 94 mercuser,502mag,efi to a 502 carb set-up.i got a new harness from a local dealer.i used for refrance a 89-92 carb wireing harness.this was about110.00.i also changed the distributor to a msd and use a marine box.that was it.there was some minor wiring,but nothing major.everybody told me i was going to take big hit in fuel consuption....i lost something like .5gallon a mile,,,,,,,,a small price to pay for being able to have a boat that i can work on/trouble shoot.i am a old school kinda guy and dont know alot about efi.
#10
Registered
iTrader: (1)
I'm in the process of going from efi mag 502 to a carbed set so I'm interested in the break down of what needs to be done.
I was under the impression that I need new wiring harness for a carb application,new distributor and carb module. Am I close with this or way off base. I would love to here what exactly I need to do from those who have done this conversion.
Thanks
I was under the impression that I need new wiring harness for a carb application,new distributor and carb module. Am I close with this or way off base. I would love to here what exactly I need to do from those who have done this conversion.
Thanks