Ideas for new cabin door
#1
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Ideas for new cabin door
It's the last piece of wood in the cabin and it needs to go!
I want to go with black to match the rest of the dash/cockpit. It needs to be functional and look good. Most importantly I don't want to spend a fortune on it
What have you guys done??
Thanks
Jim
I want to go with black to match the rest of the dash/cockpit. It needs to be functional and look good. Most importantly I don't want to spend a fortune on it
What have you guys done??
Thanks
Jim
#2
Registered
I haven't done it myself, but I have seen where the louvers have been removed and replaced with some dark plexiglass. Looked pretty good.
#4
Registered
VIP Member
iTrader: (8)
Join Date: Sep 2006
Location: CapeComa,FL
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
Top hatch for cabin door is already black acrylic. Why not remake the doors in the same? Or for a really cool touch, white semi-translucent with the gauge cluster graphic added.....
#6
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
The dash panel overlay is getting done to match the boat, might be too busy for the door??
#7
Registered
You could get clear acrylic and sand it with a da on the inside. Makes it look like frosted glass. Looks good with black and goes with any color. Lets light in also.
#10
Registered
iTrader: (4)
I forget what size you need but I have dark smoked acrylic door that slides open.
I have ordered from this place before and they will also cut it to size.
http://www.ebay.com/itm/black-plexig...item53e528e100
http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
I have ordered from this place before and they will also cut it to size.
http://www.ebay.com/itm/black-plexig...item53e528e100
http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40