Go Back  Offshoreonly.com > Technical > Do It Yourself, Boating on a Budget
30 outlaw twin 600sci Port engine wont start? Help! >

30 outlaw twin 600sci Port engine wont start? Help!

Notices

30 outlaw twin 600sci Port engine wont start? Help!

Thread Tools
 
Old 07-21-2015, 07:37 AM
  #1  
Registered
Thread Starter
 
Join Date: Sep 2008
Location: Pittsburgh, PA
Posts: 243
Likes: 0
Received 0 Likes on 0 Posts
Default 30 outlaw twin 600sci Port engine wont start? Help!

Whats up guys. So all the sudden my port engine wont fire. I got it to start when I started the starboard engine and gave it some revs but now it wont start at all. I checked the batteries and they are fine. Anyone have any ideas? Starter? Thanks
bavboym3 is offline  
Old 07-21-2015, 07:39 AM
  #2  
Registered
iTrader: (3)
 
Join Date: Oct 2007
Location: yorkville,il
Posts: 8,427
Received 87 Likes on 49 Posts
Default

are you saying it won,t crank over?
mike tkach is offline  
Old 07-21-2015, 07:48 AM
  #3  
Registered
Thread Starter
 
Join Date: Sep 2008
Location: Pittsburgh, PA
Posts: 243
Likes: 0
Received 0 Likes on 0 Posts
Default

correct. It is not even trying at this point.
bavboym3 is offline  
Old 07-21-2015, 07:51 AM
  #4  
VIP Member
VIP Member
 
VoodooRob's Avatar
 
Join Date: Jul 2011
Location: Cleveland Ohio
Posts: 1,993
Received 46 Likes on 23 Posts
Default

Starter or hydro locked??? Batteries fully charged? Have you tried pulling spark plugs?
VoodooRob is offline  
Old 07-21-2015, 07:52 AM
  #5  
Platinum Member
Platinum Member
iTrader: (6)
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 10,412
Received 3,040 Likes on 1,353 Posts
Default

kill switch
F-2 Speedy is offline  
Old 07-21-2015, 07:57 AM
  #6  
Registered
iTrader: (3)
 
Join Date: Oct 2007
Location: yorkville,il
Posts: 8,427
Received 87 Likes on 49 Posts
Default

when you engage the key do you hear a click? if yes it might be the starter slave solonoid,it is pretty common.
mike tkach is offline  
Old 07-21-2015, 08:19 AM
  #7  
Registered
 
Join Date: Sep 2013
Location: Ontario, Canada
Posts: 1,087
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by mike tkach
when you engage the key do you hear a click? if yes it might be the starter slave solonoid,it is pretty common.
mike whats the engine in your avatar?
stimleck is offline  
Old 07-21-2015, 08:24 AM
  #8  
Platinum Member
Platinum Member
iTrader: (6)
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 10,412
Received 3,040 Likes on 1,353 Posts
Default

do you hear the fuel pump cycle when the key is turned to on

Last edited by F-2 Speedy; 07-21-2015 at 08:43 AM.
F-2 Speedy is offline  
Old 07-21-2015, 08:43 AM
  #9  
Forum Regulator
VIP Member
iTrader: (1)
 
Sydwayz's Avatar
 
Join Date: May 2001
Location: Worldwide
Posts: 23,828
Received 1,195 Likes on 519 Posts
Default

Make sure you shifter for that side is in neutral. It may need a little jiggling to get there. You have a neutral safety switch, and sometimes they can get a little out of whack, or go bad completely.
Sydwayz is offline  
Old 07-21-2015, 08:44 AM
  #10  
VIP Member
VIP Member
 
VoodooRob's Avatar
 
Join Date: Jul 2011
Location: Cleveland Ohio
Posts: 1,993
Received 46 Likes on 23 Posts
Default

Originally Posted by 33outlawsst
kill switch
Forgot about this good point 33outlawsst, loose lanyards burned me a couple times at the ramp. Also sticks for the trans get "bumped" and engine wont start. Make sure your completely in neutral. Check the simple stuff, going for the more in depth stuff has always cost me time when it was an easy fix / brain fart.
VoodooRob is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.