502 mag valvetrain noise?
#13
Registered
iTrader: (7)
Good possibility but I've had engines sit for 20plus years that sat in old cars that got pulled and had no issues. Pour some Lucas in if and run it for a bit. OR dump the oil and put some mobile 1 in it. I wouldn't run that oil. Not a chance. With that said though some do with excellent results.
Pull valve cover and start with a quick valve lash. You'll find it in a hurry if it's a lifter. Get that oil out of there.
Pull valve cover and start with a quick valve lash. You'll find it in a hurry if it's a lifter. Get that oil out of there.
#14
Registered
I ran royal purple for several years, boats, race car, then had a engine failure in race car that could not figure out why...tech guy looked at crank, asked if we were running RP, he had seen several simular failures and all were running it. he suggested we get away from it, switched to brad penn and not looked back
#15
Registered
iTrader: (1)
Dutchboy - Corsa tips by any chance ? Iwas was working on a 502 that had a fuked up clicking sound coming from it,less exhaust out of one side.....looked in the tip as I was filling the outdrive and saw the silencer plate thing inside was totally loose.
#17
Registered
iTrader: (7)
Dam how is I never have these types of easy fixes. Last one I thought was an easy fix you could literally stick your hand through the oil pan and grab your CRANK. Was a rental car but still... Tic tic bang.
#18
Registered
iTrader: (7)
It's called - getting together with old friends - somebody gets bored - somebody fetches a few cases of beer and liquer - fun starts - **** brakes - night in jail - next day sucks.... Story of my life.
#19