MEFI Controllers, is there a Y cable that lets you log both motors w/o switching port
#12
Diacom does not nor does the other scan tools that I mentioned for retuning / recal of the ECM. They scan only for and report parameters and faults and history and run times plus allow group running tests and so on. They can NOT recal or change bin files not even for a single engine hook up.
I was putting out the info that one scan tool with one DLC connection can scan twin motor apps at the sametime. I thought thats what the OP was asking. Like I said alot of twins already come this way (one port (DLC) to plug one scan tool into for diagnostic scanning for twin apps).
I was putting out the info that one scan tool with one DLC connection can scan twin motor apps at the sametime. I thought thats what the OP was asking. Like I said alot of twins already come this way (one port (DLC) to plug one scan tool into for diagnostic scanning for twin apps).
#13
Registered
Thread Starter
Join Date: May 2016
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Obviously I would connect directly to engine while flashing .bins