502 timing
05-26-2017, 08:21 PM
#2
Registered
I'd set the total to 34° and let idle timing fall where it may.what ignition system are you using?
05-26-2017, 08:51 PM
#3
Registered
Join Date: Dec 2013
Location: Hampstead, NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
You may want to stay closer to 32 depending on your setup. Initial will be dependent on you distributor and if that's adjustable then cam plays into it. Demons can take higher fuel pressure I think up to 11ish + psi but I have mine regulated at 9 at the moment.
05-27-2017, 08:52 AM
#4
Registered
Thread Starter
Join Date: Jul 2013
Location: Milledgeville,Ga.
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
mercruiser thunderbolt distributor and ign. thanks for the answer
05-27-2017, 11:02 AM
#6
Registered
Join Date: Dec 2013
Location: Hampstead, NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
05-27-2017, 02:23 PM
#7
Registered
iTrader: (1)
Dumb question, and since the question has already been answered here, is there much difference from 32* to 34*? I have pretty much the same package and set it at 32* just to be well within the limits while I sort out the carb.
Yours truly,
- Baja Chicken
Yours truly,
- Baja Chicken
