Mabey I’m learning,,
#61
Registered
Thread Starter
Ok, I think I have the rev limiter figured out,got the boxes installed tonight. Only have 14 things left on my list, out of about 109 , so not to bad. New caps & rotors today, lost an hour and a half trying to fish the stainless distributor cap screw out of the bilge, then my neighbor told me I should have used the shop vac, oh well all is well here in Curtice Ohio, back with more updates soon, SC
#62
Registered
Thread Starter
Ok I’m here, wow! Got her going today! A couple of leaks, nothing bad. Check this out, got to thinking, a lot of people had luck with 32” locked timing, so I thought what the heck, returned my Daytona sensors marine cd1’s got my 1100$ back. Then , bought Delco hei chips, bolted them to my ingition mounts, (3/8”aluminum plate) wired them to my msd distributor’s, wala, instant ingition! Hit 72 on gps, never wot. Mabey 7/8” . 93oct from gas station. Seems tight, back soon with afr updates,,,,, sc
#64
Registered
Thread Starter
Back, a couple of situations
[QUOTE]well, the motors are ok. Left tranny had water in it from a bad cooler. Rebuilt over the winter. Decided to go with the Daytona sensors, to much time and money to blow it all up. Will get back here soon Kith updates , again, thank you all! Especially MT,but not only. Been going to collage onOSO- lol ,,,,SC[/QUOT
#65
Registered
Thread Starter
Idea
I need to get oil temputures, looked at in the pan sensor, and on the filter block. Has anyone ever modified an oil plug to have a temperature gauge incorporated with the plug? Would make instillation much easier.
#66
Registered
Thread Starter
Hi again. Hope everyone has had a great season! I’ve got another question on the B&m 250. Have any of you ever run a thermostat in the intake manifold? Had to cut the last trip out short due to water temperatures not coming up off the 90” mark.( stone cold)
#68
Registered
Thread Starter
Thanks Mild, good to hear from you! It’s been awhile. The old scoripion had a pretty good year. Never went far, my gps is a bunch of circles in front of Minkies marina,lol. Got about 25 hours on her though. Took a bunch of my work buds fishing a few times, been off all summer for cvid. Almost hate to go back next month!
The following users liked this post:
hogie roll (04-10-2021)