Blown 496 Mag HO 2006 26zx
#1
Lakeside Restorations.com
Commercial Member
Thread Starter
Blown 496 Mag HO 2006 26zx
I know this is taboo for some people, but I did it anyway.. so
So far so good with my new 26zx. I finally got the engine done (496 Mag HO with a custom whipple set up, big big heat exchanger, auxillary oil cooler, etc, etc). I am still prop testing.. I am waiting for some 5 blades. I cant keep the 4 blades locked up well with the high x dimension & the new power. I grabbed about a solid 10mph with a 30p b1 & I still have throttle & torque. The 32p b1 still blows out, there is too much slippage with them. I think the 5 blade will do the trick. I may also go the route of one of Julie's custom cnc props after I do a bit more testing.. Once I get the prop hooked up for a bit It pulls quite well Yippie.. I cant wait to get in the 5 blades to try.. I just hope I get them to try before the docks come out up here.. I want to be all ready for next season..
As soon as I get a chance I will get the video clips together..
Jamie / Lakeside
So far so good with my new 26zx. I finally got the engine done (496 Mag HO with a custom whipple set up, big big heat exchanger, auxillary oil cooler, etc, etc). I am still prop testing.. I am waiting for some 5 blades. I cant keep the 4 blades locked up well with the high x dimension & the new power. I grabbed about a solid 10mph with a 30p b1 & I still have throttle & torque. The 32p b1 still blows out, there is too much slippage with them. I think the 5 blade will do the trick. I may also go the route of one of Julie's custom cnc props after I do a bit more testing.. Once I get the prop hooked up for a bit It pulls quite well Yippie.. I cant wait to get in the 5 blades to try.. I just hope I get them to try before the docks come out up here.. I want to be all ready for next season..
As soon as I get a chance I will get the video clips together..
Jamie / Lakeside
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
#2
Lakeside Restorations.com
Commercial Member
Thread Starter
Some more....
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
#3
Lakeside Restorations.com
Commercial Member
Thread Starter
one more..
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
#5
Registered
Join Date: May 2005
Location: LOTO 19 MM
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
I think you will be fine. A good tune, watch your A/F Ratio and dont hold the hammer down all day and the bottom end will be fine. Did you upgrade the head gaskets? Are you running a 1.50 drive or a 1.65 ratio?
#7
Lakeside Restorations.com
Commercial Member
Thread Starter
Thanks guys.. The drive is 1.50. The Hd gaskets & internals are stock. I plan to keep the rpm between 4800-5k..
As soon as I get a chance the pics will be up on my site as well..
www.LakesideRestorations.com
Jamie
As soon as I get a chance the pics will be up on my site as well..
www.LakesideRestorations.com
Jamie
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
#8
Lakeside Restorations.com
Commercial Member
Thread Starter
The pics are up here on Oso.. You may want to consider upgrading your membership to see them, .. I believe Free members are unable to view them. Jamie
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
#9
Lakeside Restorations.com
Commercial Member
Thread Starter
Hey you arent terribly far from us where do you usually boat??
BTW.. Cool 22, I like the graphics. Jamie
BTW.. Cool 22, I like the graphics. Jamie
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]