Go Back  Offshoreonly.com > Owners Forum > Donzi
love the new 38ZR >

love the new 38ZR

Notices

love the new 38ZR

Thread Tools
 
Old 07-09-2009, 07:27 PM
  #11  
Registered
Thread Starter
 
Join Date: Aug 2004
Location: Paducah KY KY Lake
Posts: 3,812
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by GK
Jeff, just curious what prop set up are you using? I'm testing Maimus and Herring righ now on mine.
5 blade maxi 31p labbed 15 5/8" I would like to try a 30 hering 5 blade... what are your results?
customryder is offline  
Old 07-09-2009, 07:30 PM
  #12  
Registered
 
OL40SVX's Avatar
 
Join Date: Jun 2003
Location: Bristol, RI
Posts: 7,269
Received 18 Likes on 11 Posts
Default

You should see 89-90 with the Herrings in the right water and load.
OL40SVX is offline  
Old 07-10-2009, 08:39 AM
  #13  
GK
Platinum Member
Platinum Member
 
GK's Avatar
 
Join Date: Nov 2005
Location: Tampa, FL/Milwaukee WI
Posts: 204
Likes: 0
Received 2 Likes on 2 Posts
Default

Had Doug Valentine (former Donzi team driver) test my boat last week with 31 p Herring's 5-blade took forever to get on plane. We got Bob Teague involved and he is sending over some Maxis 30 p we will try next week.

Last edited by GK; 07-10-2009 at 08:43 AM.
GK is offline  
Old 07-10-2009, 01:43 PM
  #14  
Registered
Thread Starter
 
Join Date: Aug 2004
Location: Paducah KY KY Lake
Posts: 3,812
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by GK
Had Doug Valentine (former Donzi team driver) test my boat last week with 31 p Herring's 5-blade took forever to get on plane. We got Bob Teague involved and he is sending over some Maxis 30 p we will try next week.
are they labbed? if not your waisting your time.. blades are way to thick.. my experances anyway.. what was your wot with the herings? speed rpm... did they have a difused ring?
customryder is offline  
Old 07-10-2009, 03:59 PM
  #15  
GK
Platinum Member
Platinum Member
 
GK's Avatar
 
Join Date: Nov 2005
Location: Tampa, FL/Milwaukee WI
Posts: 204
Likes: 0
Received 2 Likes on 2 Posts
Default

The Herring props tested came with the boat, I'm the second owner. They do not have the defused ring, I assume they a lapped since they came that way from Herring. We tested the boat in fresh water with a 1/2 tank of fuel got 82 mph at 5200 rpm and slow to plane out of the hole. Low hour boat new condition, engines are perfect. Doug and Bob both feel the Maxis will retify the problem. I appreciate your suggestions, this is all new to me.
GK is offline  
Old 07-11-2009, 07:58 AM
  #16  
Gold Member
Gold Member
 
MarkDonzi's Avatar
 
Join Date: Jun 2005
Location: Canton,Michigan
Posts: 441
Likes: 0
Received 1 Like on 1 Post
Default

GK,

I had same boat with 525's, Hering props are very hard to get on plane with. If you get in rough water with a full boat you will really struggle. I would see a solid 89 with those props, I also had a set of labbed merc maximus which did plane easier but you will lose 3-4 mph for the trade off. I now have a ZR with 600's and the blow out on the herrings is even worse, but once you get going they are awesome.

Good Luck! If you find a better prop combination, please post your results.

Mark
MarkDonzi is offline  
Old 07-11-2009, 05:24 PM
  #17  
Registered
Thread Starter
 
Join Date: Aug 2004
Location: Paducah KY KY Lake
Posts: 3,812
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by MarkDonzi
GK,

I had same boat with 525's, Hering props are very hard to get on plane with. If you get in rough water with a full boat you will really struggle. I would see a solid 89 with those props, I also had a set of labbed merc maximus which did plane easier but you will lose 3-4 mph for the trade off. I now have a ZR with 600's and the blow out on the herrings is even worse, but once you get going they are awesome.

Good Luck! If you find a better prop combination, please post your results.

Mark
what speed are you running with the 600s?
customryder is offline  
Old 07-11-2009, 05:27 PM
  #18  
Registered
Thread Starter
 
Join Date: Aug 2004
Location: Paducah KY KY Lake
Posts: 3,812
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by GK
The Herring props tested came with the boat, I'm the second owner. They do not have the defused ring, I assume they a lapped since they came that way from Herring. We tested the boat in fresh water with a 1/2 tank of fuel got 82 mph at 5200 rpm and slow to plane out of the hole. Low hour boat new condition, engines are perfect. Doug and Bob both feel the Maxis will retify the problem. I appreciate your suggestions, this is all new to me.
i would be interested in trying the herings ... if you want to try my labbed maxi... again you will need to lab the maxi to get any top end... are you trimming the boat correct?
customryder is offline  
Old 07-12-2009, 07:03 PM
  #19  
GK
Platinum Member
Platinum Member
 
GK's Avatar
 
Join Date: Nov 2005
Location: Tampa, FL/Milwaukee WI
Posts: 204
Likes: 0
Received 2 Likes on 2 Posts
Default

Today I got 85 mph trimmed at 3-4 with the Herrings but takes too long to get on plane. Bob Teague will be sending me some 30 maxis this week. Hpfully that will work.
GK is offline  
Old 07-14-2009, 04:19 PM
  #20  
Gold Member
Gold Member
 
MarkDonzi's Avatar
 
Join Date: Jun 2005
Location: Canton,Michigan
Posts: 441
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by customryder
what speed are you running with the 600s?
95 under right conditions but sold 92-93 with Hering 5 blade 32 pitch labbed props. Midrange is a lot stronger with 600's too.
MarkDonzi is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.