Drive Shift hesitation

[JaayTeee]

Originally Posted by 25 hors la loi

Yes he engage normal ...but with a 2 to 3 seconde delay ..in foward and reverse ..... i have found a manuel on how to adjuste the linkage ...but it`s not the same than mine ....have you some info on how to adjust mine ???
Thank`s to take time to respond me

The cable you have circled is the shift cable from the
helm.

The drive cable is below that.

Here's a picture of the bracket.

http://www.mercruiserparts.com/Show_...2D+Design+I%29

Using D*cks proceedure for adjustment.

The barrell he mentions is mounted in item # 10,
it's held in by a cotter pin.

To increase the lenght of the throw, adjust the stud
( item # 15) upward.

hope this helps.

[25 hors la loi]

Thanks JaayTeee ....my concern is in the manual i attached ....the shift cable from the helm
is not the same than the one mentioned ....i have no control cable barrel ...how can i found my backlash for control cable ???

And a big thanks you .....for your patience

[JaayTeee]

The barrell is on the drive shift cable, not
the cable from the helm.

The adjustments you want to check for are
with the drive shift cable ( underneath the helm cable)

[25 hors la loi]

Originally Posted by JaayTeee

The barrell is on the drive shift cable, not
the cable from the helm.

[B]In the manuel ....it`s not the same than me ...but he speak about adjusting the backlash of the control cable .... i have to check for that ???
again sorry for my poor english ...and thanks to take time [B]

[Mr Gadgets]

25, I sent you a pm.. more later when I am not so tired..

D*ck

[25 hors la loi]

Originally Posted by Mr Gadgets

25, I sent you a pm.. more later when I am not so tired..

D*ck

Thank`s a lot ....it`s realy appreciated ....