35CAFE

Anyone Know Where I Can Get A Prop Shaft For A Trs Port Side Drive (mines Bent). By Boat Is Cigarette Cafe Racer And I Think Its A 1.5 Ratio

picklenjim

Here is a place that will straighten it for you.I had one done there and it was $250 and shipping.Those shafts are no longer available from Mercury and when they were they were $725.Seen your other post and assume yours are set up turning out so if it's the port side then it must be for a left hand drive.All TRS drives are 1.5:1 ratio.Prop shafts are different in left or right.http://www.formulapropeller.com/services.html
I'm from St.Charles,do you run the river?

picklenjim

Here's a place that supposedly has them new.Are you sure it's a left hand.Check on the end of the shaft that the prop nut is on and it is sometimes stamped with a L or R.https://www.marinepowerservice.com/B...roductID=42507

Part number for a left hand shaft is 44-92327T1

Mbam

If all else fails we have a good used one, will sell it for $400

Audiofn

I have a new one I will sell for 600 bucks

Panther

Damn, I didn't realize my used TRS stuff was worth so much!!!

I sold a bunch of used parts to a guy for $150 a while ago which included prop shaft, input shaft, vertical shaft and a few other misc. items....

picklenjim

35CAFE, Ya still lookin? Here's one on ebay.http://cgi.ebay.com/ebaymotors/Mercruiser-TRS-Lower-Unit-Internals_W0QQitemZ200361088714QQcmdZViewItemQQptZ Boat_Parts_Accessories_Gear?hash=item2ea67396ca&_t rksid=p4506.c0.m245&_trkparms=65%3A12|39%3A1|72%3A 1171#ebayphotohosting

Left Hand

Doller Offshore

We have a few good used ones in stock give us a call at 954-237-0332 Julio

35CAFE

Thanks guys for all your help got the parts and drives at the shop being repaired!!

stageharbor

I have this type of prop shaft straightened at the local prop shaft shop for 45-75$ they are called H & H propeller.