Go Back   Offshoreonly.com > Technical > Drives and Lower Units


OSO Sponsor
NorTech
OSO Sponsor

Advertiser

Advertiser


Reply
 
 
 
 
Thread Tools
Old 10-09-2009, 12:15 PM   #31
Rik
arneson-industries.com
Offshoreonly Advertiser
 
Rik's Avatar
 
Join Date: Jan 2001
Location: California
Posts: 1,960
Quote:
Originally Posted by alfons View Post
The damage to the hull wasnt that big ! I was there !! Dont get me wrong here Rik ! I think Arneson an other surface drives are great ! But with a small stephull like the Bat you have almost a fixed runningangle tru the water ! And therefore i think the Arn. lift the stern to much. The drive isnt the problem the boat is to short !! Now when Christer is driving with double ext. box The boat runs great in a straight line , But in turn it looks scaary ! The best drive for the bat is the volvo DPX-r Its like driving on tarmac with slicks ! sorry little oftopic there !
Christer does not push it in the turns or on the straights. Remember, he's to old to get beat up he says

The boats bottom is not the same. Ocke would not advise him to do anything to it and it needed a tune up. I've seen the photos and the boat runs nose down. This is why he added all that weight to the rear and he extended it so far. Poor balance or terrible bottom??? 28' V is to small for a drive that heavy and long without a reason. The DPX will never hold up nor go over 100 like he wants so that is out.
__________________
Arneson Surface Drives www.arneson-industries.com
Rik is offline   Reply With Quote
 
 
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 10:51 PM.


Copyright 2011 OffShoreOnly. All rights reserved.

Search Engine Optimization by vBSEO 3.2.0