Omc King Cobra...

[90widow]

my boat was set up with omc king cobra drives. repowering what would be the best way to go using gen IV 454's. what trans & drives should i use? thanks

[hoozeyurdaddy]

if you've got the money, change it over to bravo sys. you will need from the transom assy back, and it will bolt up to existing cut out, may have to drill a couple of new hole's and modify the cut out a little, but it will work.

[twistedvelocity]

Do you still have the king cobras?
How much HP are you shooting for?

[90widow]

No I dont have them. I bought the boat with no motor and or drives. Im not trying to get to much power just trying to make it a good reliable boat to take the family out. what would you recommend? they told me bravos but ive also heard to go with alpahs?? thanks for the help!

[sikinboat]

go with bravo's big blocks and alphas were no fun thats why they were only around for 1 year.

[rchevelle71]

Since you have to buy everything anyway, might as well go with Bravo's. There is a marine flea market coming up in Dania March 18-21, you may be able to pick up the stuff used at a good price there, or buy used from someone here.

[sac]

I have drives and gimbles

[90widow]

Originally Posted by rchevelle71

Since you have to buy everything anyway, might as well go with Bravo's. There is a marine flea market coming up in Dania March 18-21, you may be able to pick up the stuff used at a good price there, or buy used from someone here.

sounds good im going to look it up... thanks

[90widow]

Originally Posted by sac

I have drives and gimbles

how much you want for them?

[sac]

6K, no salt in excellent condition, boat was totaled when it was a couple of years old