Go Back   Offshoreonly.com > Technical > Drives and Lower Units


OSO Sponsor
NorTech
OSO Sponsor

Advertiser

Advertiser


Reply
 
 
 
 
Thread Tools
Old 03-13-2010, 12:48 PM   #1
Registered
 
Join Date: Dec 2009
Location: Grain Valley,Mo
Posts: 859
2000 firehawk 2600
Imco -2 question

Previous owner of my 2600 firehawk cat has a -2 shortie with a 1 1/2" spacer Doesnt that defeat the purpose of the -2". If I dont use the spacer would I have a problem getting on plane and i"m guessing i would need a new coupler if i dont use spacer any help would be great thanks
firehawkcat is online now   Reply With Quote
Old 03-13-2010, 01:44 PM   #2
Charter Member # 55
Charter Member
 
Griff's Avatar
 
Join Date: Oct 2000
Location: Omaha
Posts: 11,046
32 Active Thunder
Yep, only gives you a 1/2 inch of rise on the prop. Eliminating the spacer could make it hard to get on plane and cause high prop slip numbers. It just depends on how dialed in it was before. You would need new studs and a stock upper to lower coupler to eliminate it.
Griff is offline   Reply With Quote
Sponsored Links
Old 03-13-2010, 02:47 PM   #3
Registered
 
Join Date: Dec 2009
Location: Grain Valley,Mo
Posts: 859
2000 firehawk 2600
thanks for the good info Griff, didnt think about the stud lengths
firehawkcat is online now   Reply With Quote
 
 
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 10:02 PM.


Copyright 2011 OffShoreOnly. All rights reserved.

Search Engine Optimization by vBSEO 3.2.0