imco scx upper with max machine workx lower
#1
Registered
Thread Starter
Join Date: Dec 2004
Location: shreveport, LA
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
imco scx upper with max machine workx lower
imco scx seems to have a strong upper but when coupled to the imco sc lower, the lower might be the weak point. anyone know if the max machine workx billet 2002-x2 will bolt on to the imco scx upper. i believe the mmw lower is a stronger lower than the imco sc and faster than the imco scx lower. any ideas? seems like this would make a good combo if possible.
Last edited by La/stryker; 04-13-2010 at 02:13 AM. Reason: more info
#2
Charter Member #601
Charter Member
Does the max lower use the XR gears in it? If so that is the weak point.
It should bolt on if that lower will bolt to an XR upper. You will need the special coupler to do it though.
It should bolt on if that lower will bolt to an XR upper. You will need the special coupler to do it though.
#3
Platinum Member
Platinum Member
iTrader: (1)
Other than less case flex from the billet case and I have been told that somehow max worx is using some kind of double bearing set-up on vert shaft (not sure that is a real problem) those bravo lower gears are still a expendable wear item,Smitty