Teague Plat xr question
04-18-2010, 07:28 PM
#1
Registered
Thread Starter
Join Date: Dec 2009
Location: Grain Valley,Mo
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
Teague Plat xr question
Installed new drive and all o-rings took boat out for about a hour today got home have a slight leak on starboard side at lowest bolt(stud and nut) do i need to re-torque these or is it something else
04-19-2010, 04:46 AM
#2
Charter Member #601
Charter Member
What kind of leak? Oil or water? and what stud? One of the 6 mounting studs?
If you have a water leak there, then one of the orings is not sealing properly.
There should not be any oil leaks..
Give us more details please..
If you have a water leak there, then one of the orings is not sealing properly.
There should not be any oil leaks..
Give us more details please..
04-19-2010, 08:10 PM
#4
Registered
Thread Starter
Join Date: Dec 2009
Location: Grain Valley,Mo
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
I re-torqued the nuts on upper, gear oil leaked has stopped. I believe the leak was where the oil inters the lube reservior in the bell housing Got lucky
