xr seals how much???
#1
Registered
Thread Starter
Join Date: Nov 2007
Location: GLOC claremore
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
xr seals how much???
How much are you guys paying to have new seals installed in your bravo drives? I have an xr drive that I'm having torn down and was quoted $600 to have resealed. That's just for seals, not saying its to much I just don't know.
#3
The hardest part of that job is taking the drive off to replace the drive to gimbal housing seal. Other than that, split the lower from the upper, replace 2 o-rings, pull the prop-shaft carrier, replace one o-ring & one seal.
$600 is pretty steep for $25 worth of parts & 2 hours of labor.
$600 is pretty steep for $25 worth of parts & 2 hours of labor.
#5
Registered
The hardest part of that job is taking the drive off to replace the drive to gimbal housing seal. Other than that, split the lower from the upper, replace 2 o-rings, pull the prop-shaft carrier, replace one o-ring & one seal.
$600 is pretty steep for $25 worth of parts & 2 hours of labor.
$600 is pretty steep for $25 worth of parts & 2 hours of labor.