Trim cylinder rebuild question.
02-05-2012, 07:39 PM
#1
Registered
Thread Starter
Join Date: Dec 2010
Location: Arizona
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Trim cylinder rebuild question.
Hey all,
I am rebuilding the tilt/trim cylinders on my alpha one(gen 1) outdrives. My question is, what are the little brown felt like material pads for? I did not find them anywhere when I disassembled the cylinders, and they are not mentioned anywhere in the overhaul kit instructions. Other then that it seems to be a much easier task then I was planning on....For once!!!
Thanks in advance guys.
I am rebuilding the tilt/trim cylinders on my alpha one(gen 1) outdrives. My question is, what are the little brown felt like material pads for? I did not find them anywhere when I disassembled the cylinders, and they are not mentioned anywhere in the overhaul kit instructions. Other then that it seems to be a much easier task then I was planning on....For once!!!
Thanks in advance guys.
02-06-2012, 05:43 PM
#2
Registered
Thread Starter
Join Date: Dec 2010
Location: Arizona
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Cricket-cricket........what are you all shy or, has no-one ever rebuilt there trim cylinders. The alpha one and bravo one use the same cylinders and overhaul kits!!!!!
02-06-2012, 06:47 PM
#3
Registered
Join Date: Jul 2010
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Well I will .
It has been awhile that I used a complete overhaul kit . Most of time we just use the seal kit
#25-87400A2 . That kit has a little cardboard (DISC) , I think it is a moisture prevent doodad.
Mac
It has been awhile that I used a complete overhaul kit . Most of time we just use the seal kit
#25-87400A2 . That kit has a little cardboard (DISC) , I think it is a moisture prevent doodad.
Mac
