bor

iTrader: (1)

Wil a -3" shorty bolt on a bravo upper ?

the prop will interfere whit the cavation plate but planning to run a custom smaller prop.

anyone have left over ,can be case only whit vertical shaft

thx

bor

Griswald

Yes, with some mods to the upper case. I'm in the middle of one right now

Philm

You will either have to run a smaller prop, which will probably increase your slip a good bit, or you can cut the cavitation plate and space it up an inch. I dont know if someone made a kit for this or what, but i have seen a few with that setup before.