IMCO Shorty Cav Plate template.
#1
Registered
Thread Starter
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
IMCO Shorty Cav Plate template.
G'day all,
Does anyone have a template for the Cavitation plate for the IMCO Shorty?
I need to make one up as shipping to Aus now doubles to cost of purchase and I have obtained a bit of sheet stainless to do the trick.
All I need it the LxWxH and bolt hole spacing if anyone has it?
Cheers!
Does anyone have a template for the Cavitation plate for the IMCO Shorty?
I need to make one up as shipping to Aus now doubles to cost of purchase and I have obtained a bit of sheet stainless to do the trick.
All I need it the LxWxH and bolt hole spacing if anyone has it?
Cheers!
Last edited by Ghostrider; 12-18-2012 at 04:13 PM.
#3
Charter Member #601
Charter Member
The plate is 8" wide at the front and 7" wide at the back. Plate length is 7 1/4". Mounting holes are 1/2" from the front and spaced 1 1/2" apart. About 1 1/8" from the edge and parallel to the side of the plate. The notch is about 6 1/4" long.
That's about it.. Hope that helps.
Dick
That's about it.. Hope that helps.
Dick