dereknkathy

biggest problem with TRS is 30 year old aluminum. the transoms get eaten up too. any TRS drive or transom that is solid is worth buying...

Fenderjack

iTrader: (2)

Plenty of cherry trs drives and parts for sale .They are great drives with moderate power.I take it you have had no problem with breakage.Cost way less than a konrad conversion.John Sr

bcfountain

I agree with the others.buy used trs parts and save them.

ROB FREEMAN

iTrader: (2)

mel riggs says he has 100 trs drives .parts are easily available . although i did the ful prs konrad conversion . it was a job . but dam have they been awsom . updated the look of the trs a ton also . im running 750 .750 tq and they havent missed a lick ..

kennyd

iTrader: (1)

I also have done the konrad swap and have had great luck with them on a heavy heavy flatdeck .

hoodoo

I picked up a complete trs lower in Ft Meyers last spring that was brand new, also bought a steering assembly from Dollar marine a couple years ago that was still brand new so parts are still pretty easy.
However the half conversion with konrads would be the best next step.

ROB FREEMAN

iTrader: (2)

yes anyone caught up on trs , no parts is just plain wrong

Harvey

Did the full conversion on a Topgun. Broke two TRS drive just easy running with stock 502s. Built two new Merlin 555 cuin engines and Kondrads,no problems in two years. Not cheap, just do it for piece of mind.

cig92

i've got a complete konrad conversion that has about 5 hours on it and will come with a 90 day warranty. transom assemblies, tie bar, all hardware and the 540's. 15k for the whole deal. i will see if i can get a few pictures up, they are mint. the boat has never sat in the water or outside for that matter.

TAStevens

If you still have the Konrads...Im INTERESTED! Once I convert...I will have 1-GOOD TRS For Sale and a "Parts" TRS...Package Deal! Tim 616-260-4064