weldcrane

what is the proper way to fill #3 drives? thanks

Unlimited jd

iTrader: (5)

Same as a bravo, pump in through the bottom until it comes out at the top. I just fill to the vent in mine, don't put any in the expansion reservoir in the transom assembly

Unlimited jd

iTrader: (5)

Btw they take 2.5 GALLONS of fluid each

weldcrane

It will expand enough to show in the site glass on the inner transom assembly ?

MILD THUNDER

iTrader: (3)

Supposed to.

This year, I plan to add a bravo style reservoir to mine. I am going to put a nipple fitting on the inner transom plate, where the current breather vent is, and plumb it to the reservoir bottle. I am sick of guessing if i have enough oil in the drives or not.

weldcrane

You have a sight glass on the transom assembly that you can see ?

Unlimited jd

iTrader: (5)

I do but I don't put any fluid in there. Read too many times about it puking out. I just crack the top plug and make sure clean fluid starts to come out once a week.

ricardo mann

[ATTACH=CONFIG]534741[/ATTACH] i have res on 3 drive and i also have retro fitted res on tail stocks