Never before lower problem
04-22-2015, 01:46 AM
#1
Registered
Platinum MemberThread Starter
Join Date: Jan 2006
Location: wisconsin
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Never before lower problem
Bravo XR with -2 sport master lowers... The prop hub (bravo 1 prop) is grinding into the Bearing Carrier Retainer nut?? WTF... this happened on 2 of the three drives (both outside drives) one right hand and the other left hand rotation. The center drive is fine. I have blown up & wrecked (I thought) everything that could be on a Bravo XR... This is new to me.. Anyone have any ideas on what caused this? I replace gears & bearings every 25 hours or close too, and just discovered this little surprise 
.
Oh yes.... this now happened when I changed the lowers to the 17/18 gears to get a 1.25 overall gear ratio.
.Oh yes.... this now happened when I changed the lowers to the 17/18 gears to get a 1.25 overall gear ratio.
Last edited by Bawana; 04-22-2015 at 01:58 AM.
