Thinking about making good TRS lower gears and shaft.. Any interest.
#31
Gold Member
Gold Member
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
I'm picking up a 35' cigarette with TRS drives on it next week. The drives are my only concern on the boat as far as longevity goes. I would be interested in better lowers. It's running a staggered set up. Has anyone ever heard of running surface drives on a boat with staggered motors? Or am I limited to certain applications that I can run?
I also have another boat that has XR's on it. And they are definitely the weak link since I have 900's as power. So lowers for the XR??? Heck Yes!
I also have another boat that has XR's on it. And they are definitely the weak link since I have 900's as power. So lowers for the XR??? Heck Yes!
#33
VP of the tickfaw200
#34
Registered
VIP Member
Join Date: Oct 2011
Location: Philadelphia, Pa
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Ill take a set trs like to pull teeth...my boat only does 80 its heavy and with trs its only a matter of time. Really I want arnesons but I need 55 k so im in
#38
Registered
Join Date: Sep 2017
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Better Gears
I would buy better metal gears if available,since old TRS gears are just picking up the hardened surface then destroying themselves!!! Just bought 2 sets of BRAND NEW gears but finding someone to clearance and install them in the case is another story as that is the most important part of the process with old or new gears!!! Anybody available up here in Ct?????
#40
Registered
Join Date: Sep 2017
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Blown Gear
When I say blown up I am meaning a chipped tooth or metal picking up from the hardened finish on the gear!!! I always check to make sure the bearing carrier fits tight in the case!!! My opinion now is that a installer who knows his stuff is needed!!!