need expertise on Excalibur 40 Hawk
#1
Registered
Thread Starter
Join Date: Dec 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
need expertise on Excalibur 40 Hawk
I have excalibur 40 Hawk with CAT 3208 diesels and Arneson drives.
I have upgraded the vessel in al the ways, even full inside decoration has been done in carbon, bow thruster, windlass, chain, etc..
what I like to ask is the following:
1-Since my chain weighs 400lb at the bow, so how much weight I need to take out from under bed in v-berth?
2-I have mounted my trim tabs parallel to the chines like the fountains have I done a right thing?
I will also post some recent pictures so you can comment.
thanx
I have upgraded the vessel in al the ways, even full inside decoration has been done in carbon, bow thruster, windlass, chain, etc..
what I like to ask is the following:
1-Since my chain weighs 400lb at the bow, so how much weight I need to take out from under bed in v-berth?
2-I have mounted my trim tabs parallel to the chines like the fountains have I done a right thing?
I will also post some recent pictures so you can comment.
thanx
#5
Registered
Thread Starter
Join Date: Dec 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
It does without any problem, however I like learn how much of ''FLORIDA PLAY SAND'' I should take out to find the correct weight balance,in order to prevent bow movement at top speed and drives up..
On your boat how much PLAYSAND do you have under the v berth?
so I may be able to make a proportion?
thanx
Burak
On your boat how much PLAYSAND do you have under the v berth?
so I may be able to make a proportion?
thanx
Burak
#7
Registered
Thread Starter
Join Date: Dec 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
what about the weight under the bed, have you taken it out completely..
There should be nearly 380 lb of Florida Play Sand under the bed...
It was placed there by the factory at that time..
Since I have the anchor and the chain, I have taken mine out..
There should be nearly 380 lb of Florida Play Sand under the bed...
It was placed there by the factory at that time..
Since I have the anchor and the chain, I have taken mine out..
#9
JC Performance Engines
Gold Member
How much chain are you carrying?
400lbs of anchor and line sounds like alot.
Maybe swapping to a slide anchor, that need no chain would help.
400lbs of anchor and line sounds like alot.
Maybe swapping to a slide anchor, that need no chain would help.