Offshoreonly.com http://www.offshoreonly.com/forums For over five years Offshoreonly.com has been the leading website of high performance boating enthusiasts. Our Bulletin Board, Chat Room, Classifieds section, Photo and Movies Sections, and On-line store account for our success in becoming the largest boating website on the internet. With an average of over 20 million hits on our server per month you can find the information that you are looking for, or just make friends with other boaters who share a common interest. en Sat, 21 Nov 2009 08:34:06 GMT vBulletin 60 http://www.offshoreonly.com/forums/images/misc/rss.jpg Offshoreonly.com http://www.offshoreonly.com/forums best way to winterize dominator carbs http://www.offshoreonly.com/forums/general-boating-discussion/220323-best-way-winterize-dominator-carbs.html Sat, 21 Nov 2009 04:31:15 GMT run them dry ? run oil threw them ? or take them off thanks . run them dry ? run oil threw them ? or take them off thanks . ]]> General Boating Discussion joepequa http://www.offshoreonly.com/forums/general-boating-discussion/220323-best-way-winterize-dominator-carbs.html Cigarette Soundtrack http://www.offshoreonly.com/forums/cigarette/220322-cigarette-soundtrack.html Sat, 21 Nov 2009 04:00:58 GMT Took the Cig out for a late season run and shot a little video. Both the Cig and the 700's ran like a champ!

http://www.youtube.com/watch?v=P76T1PgoI-0

YouTube Video
If you are able to see this message it means that you don't have flash installed or that the video server is down.
]]> Cigarette tesheer http://www.offshoreonly.com/forums/cigarette/220322-cigarette-soundtrack.html tall deck http://www.offshoreonly.com/forums/general-boating-discussion/220321-tall-deck.html Sat, 21 Nov 2009 03:30:47 GMT Can you machine down a tall deck manifold for a standard deck thanks Can you machine down a tall deck manifold for a standard deck
thanks ]]> General Boating Discussion baja27 http://www.offshoreonly.com/forums/general-boating-discussion/220321-tall-deck.html <![CDATA[Copeland's Phenomenon Project]]> http://www.offshoreonly.com/forums/general-boating-discussion/220320-copelands-phenomenon-project.html Sat, 21 Nov 2009 03:14:47 GMT I would like to give an introduction into the Phenomenon and my role. I have been with Copeland's Motorsports for 18 years and this is my 6th turbine boat project for them. I started this project with Al Copeland Sr in 1998 and am currently finishing it with his family. The boat is a 56ft, 13.6' wide Phenomenon design that we currently have molds of and hope to manufacture. We are rigging the boat with four t-55 L7C turbine engines, four custom gearboxes, 2 custom crashboxes for reverse, and four ASD 11 custon Arneson drives. We are hoping to splash the boat sometime in December. Al Copeland Jr will drive and I will throttle and we hope to break multiple speed records including the Miami to New York, which Al Copeland Sr still holds in the Popeyes V bottom. This project was extremely important to Al Copeland Sr. as it is to us and I hope that it is to you.

Scott Barnhart ]]> General Boating Discussion Phenomenon http://www.offshoreonly.com/forums/general-boating-discussion/220320-copelands-phenomenon-project.html ITS Drives/transome assys http://www.offshoreonly.com/forums/swap-shop/220319-its-drives-transome-assys.html Sat, 21 Nov 2009 03:01:39 GMT Pair of ITS Transom Assemblies complete with XR Drives and Sportmaster Lowers 1.36 (standard length). Both fresh, 1 with new upper gears. $13,500 for all. Xr Drive upper and lower complete. DWP 1.5 Factory Re-Man approximately 20 hours since new. This was my spare/back-up drive. $3,500 Set... Pair of ITS Transom Assemblies complete with XR Drives and Sportmaster Lowers 1.36 (standard length). Both fresh, 1 with new upper gears. $13,500 for all.

Xr Drive upper and lower complete. DWP 1.5 Factory Re-Man approximately 20 hours since new. This was my spare/back-up drive. $3,500

Set of new in box XR Upper Gears 19/16 P/N 43-840898A3 $1,200

PM or post contact info and I will send pictures. All prices plus shipping ]]> Swap Shop ciaoderhead http://www.offshoreonly.com/forums/swap-shop/220319-its-drives-transome-assys.html 1/8th scale sutphen http://www.offshoreonly.com/forums/sutphen/220318-1-8th-scale-sutphen.html Sat, 21 Nov 2009 02:52:37 GMT http://www.rcboatcompany.com/aboutus.html http://www.rcboatcompany.com/aboutus.html ]]> Sutphen 30ctsutphen http://www.offshoreonly.com/forums/sutphen/220318-1-8th-scale-sutphen.html Powerboat Custom Clocks http://www.offshoreonly.com/forums/general-boating-discussion/220317-powerboat-custom-clocks.html Sat, 21 Nov 2009 02:48:08 GMT Just wanted to introduce something a little different. Custom clocks with your boat are available in 24" diameter for the shop /office or 16" for around the house. You can choose from Jay's(Naple Image) at http://www.flickr.com/photos/jay2boat/sets/ or mine at www.performance-images.com.



.

.


These are photos of them complete

.
]]> General Boating Discussion Swede http://www.offshoreonly.com/forums/general-boating-discussion/220317-powerboat-custom-clocks.html air/fuel ratio o2 hook up? http://www.offshoreonly.com/forums/general-q/220316-air-fuel-ratio-o2-hook-up.html Sat, 21 Nov 2009 01:49:12 GMT Anyone know how to hook up an o2 sensor on a modified carbed 502,running way too rich,75 and 80 jets in a 950 holley.Ran great with K.eickert exhausts but too rich for my Gil's. How do you install it upstream of the cooling water?Dont want to waste time with trial and error jet swapping and plug reading.And does anyone have a ratio meter for sale...thanks Frank. ]]> frankrp http://www.offshoreonly.com/forums/general-q/220316-air-fuel-ratio-o2-hook-up.html good news Julie,s back http://www.offshoreonly.com/forums/prop-talk/220315-good-news-julie-s-back.html Sat, 21 Nov 2009 01:44:48 GMT I talked to Julie today and there a month ahead of schedule to open there knew state of the art CNC shop and there going to work on prop like they did in the past. I talked to Julie today and there a month ahead of schedule to open there knew state of the art CNC shop and there going to work on prop like they did in the past. ]]> Prop Talk crayolacrazy http://www.offshoreonly.com/forums/prop-talk/220315-good-news-julie-s-back.html Any 2600 for sale? http://www.offshoreonly.com/forums/american-offshore/220314-any-2600-sale.html Sat, 21 Nov 2009 01:38:19 GMT Sold my current boat and looking to get back into a 2600 for under 30K. Anything out there? Sold my current boat and looking to get back into a 2600 for under 30K. Anything out there? ]]> American Offshore DrewDown http://www.offshoreonly.com/forums/american-offshore/220314-any-2600-sale.html Slider Hardware/Formula Fastec http://www.offshoreonly.com/forums/swap-shop/220313-slider-hardware-formula-fastec.html Sat, 21 Nov 2009 00:48:24 GMT Hey yall.....

I know this isn't the WTB forum, but the other one gets no luv...

I need the rollers (top and bottom) for the slider. I don't have the old ones, so I don't even know where to begin looking. I have a new door/slider, but it didn't come with any hardware except for the latch.... ]]> Swap Shop commandersander http://www.offshoreonly.com/forums/swap-shop/220313-slider-hardware-formula-fastec.html Props for 353 http://www.offshoreonly.com/forums/formula/220312-props-353-a.html Sat, 21 Nov 2009 00:26:43 GMT I have a 2008 353 with 496 HO's running 28" Bravo props that came with the boat new. Getting 70-71 top end at only 4700 rpm. Also seems like I am having to give the boat too much trim to get 70. Big rooster tail. I am thinking I may need a new prop setup. Advice on which props are the best to use on a 353/496 combo would be appreciated. ]]> Formula Godacious! http://www.offshoreonly.com/forums/formula/220312-props-353-a.html Turkey day patchogue bay! http://www.offshoreonly.com/forums/general-boating-discussion/220311-turkey-day-patchogue-bay.html Fri, 20 Nov 2009 23:43:56 GMT Anyone from long island interested in an early thanksgiving day run from Moses bridge to smithpoint bridge and back. Looking to head out at 10:00 to be in by 1:00. Anyone from long island interested in an early thanksgiving day run from Moses bridge to smithpoint bridge and back. Looking to head out at 10:00 to be in by 1:00. ]]> General Boating Discussion 34disturbed http://www.offshoreonly.com/forums/general-boating-discussion/220311-turkey-day-patchogue-bay.html New Nordic 29ft Escape http://www.offshoreonly.com/forums/nordic/220310-new-nordic-29ft-escape.html Fri, 20 Nov 2009 23:31:01 GMT Here's some pix of a new 29ft Escape! This Boat is a project put together by Oregon custom marine,Nordic powerboats,and Ilmor marine.
We feel that the customer will be very happy with this package.
I will post some performance #'s after the boat is tested in DEC.

Tim
oregoncustommarine.com
Attached Images
File Type: jpg IMG_1009.jpg (60.0 KB)
File Type: jpg IMG_0833.jpg (106.6 KB)
File Type: jpg IMG_1012.jpg (41.7 KB)
File Type: jpg IMG_1023.jpg (60.5 KB)
]]> Nordic OCM http://www.offshoreonly.com/forums/nordic/220310-new-nordic-29ft-escape.html Cigarette Style in Key West http://www.offshoreonly.com/forums/general-boating-discussion/220309-cigarette-style-key-west.html Fri, 20 Nov 2009 23:25:13 GMT Cigarette showed up in Key West in style with new Top Fish Open and the ever- popular Top Gun Unlimited Cigarette showed up in Key West in style with new Top Fish Open and the ever- popular Top Gun Unlimited
Attached Images
File Type: jpg TopFishOpenWEB.jpg (56.2 KB)
File Type: jpg IMG_6120.jpg (207.1 KB)
]]> General Boating Discussion PR Power http://www.offshoreonly.com/forums/general-boating-discussion/220309-cigarette-style-key-west.html