Fiberglass work in NJ
09-27-2005, 10:50 AM
#1
Platinum Member
Platinum MemberThread Starter
Fiberglass work in NJ
I am looking for a good shop that can blueprint the botom of my boat and do a few small gelcoat chip repairs.
2003 29' Kryptonite
2003 29' Kryptonite
Re: Fiberglass work in NJ
09-27-2005, 08:44 PM
#3
Registered
Join Date: Sep 2001
Location: Galloway, NJ
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fiberglass work in NJ
If Tony isn't available, you can call me at my shop. I am On the Mullica River. Marine Specialists, LLC. The shop number is 609-748-0073 or My cell 609-709-8387. We do top quality work, if i DO say so myself. I have several boats in the shop as well as a customer ref. list I would be happy to provide.
I'm assuming you have a yellow boat with twin outboards?
Hope to hear from you,
Jim Ritchie
I'm assuming you have a yellow boat with twin outboards?
Hope to hear from you,
Jim Ritchie
09-29-2005, 09:26 AM
#4
Platinum Member
Platinum MemberThread Starter
Re: Fiberglass work in NJ
Hi Jim,
I have a black and white I/O that I run out of the Barnegat area. I know the yellow one you are referring to though. The bottom of my boat is white with black sides and white deck (with red and silver trim). See avitar pic. Most of the work is in the bottom with only one chip in the black gel. I also have some stains on the deck that I don't know what to do with (tree sap, dirt). I am getting a full cover for next season!
I have a black and white I/O that I run out of the Barnegat area. I know the yellow one you are referring to though. The bottom of my boat is white with black sides and white deck (with red and silver trim). See avitar pic. Most of the work is in the bottom with only one chip in the black gel. I also have some stains on the deck that I don't know what to do with (tree sap, dirt). I am getting a full cover for next season!
Gold Member
09-29-2005, 08:33 PM
#6
Registered
Join Date: Sep 2001
Location: Galloway, NJ
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fiberglass work in NJ
Tom,
I'm less than 2 mins off the GS Parkway. If you want me to take a look at it give me a call and i can schedule some time.
Do you have some damage on the bottomr?
Either way we do expert repairs as well as custom fabrication and rigging.
Jim
I'm less than 2 mins off the GS Parkway. If you want me to take a look at it give me a call and i can schedule some time.
Do you have some damage on the bottomr?
Either way we do expert repairs as well as custom fabrication and rigging.
Jim
Last edited by Catagory5; 09-29-2005 at 08:42 PM.
09-30-2005, 08:40 AM
#7
Platinum Member
Platinum MemberThread Starter
Re: Fiberglass work in NJ
Jim, there is a chip out of the edge of the step 3" x 1/4" and some small gouges where the forks picked the boat at my marina. We had a small little mishap loading it on the trailer recently, nothing major. Also, under the swim platform, the drive was over-trimmed (when I got stuck @ the Dutchmen's 
) and gouged up the bottom edge (not below water-level).
) and gouged up the bottom edge (not below water-level).
09-30-2005, 06:47 PM
#9
Registered
Join Date: Sep 2001
Location: Galloway, NJ
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fiberglass work in NJ
The dutchmans is rough!!!!!!!!!! Bring it on in or stop by and check out our shop. ON second thought don't bring it on in I couldn't get to it for a few weeks anyway but your welcom to stop by anytime. We TRY to close on Sundays. We currently are working on a 22 Apachi, 31 Cobra, 2 cali. skiboats and I have a triple engine 36 Cobra due in on the 15th as well as all the misc. "stuf"
