question for glass dave
02-04-2008, 11:56 PM
#1
Platinum Member
Platinum MemberThread Starter
iTrader: (1)
Join Date: Dec 2002
Location: lafayette La.
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
question for glass dave
what material should i use as a starter or base in sheets such as foam that i can cut and shape than glass over,
02-05-2008, 12:42 AM
#2
about half way down this page are some poly foam sheets that shape easy and can be glassed over. I have a local industrial insulation warehouse that can get me the exact same thing quite a bit cheaper, you may want to check with some of the suppliers in your area. What are you working on?
http://www.fibreglast.com/showproduc...sFoam-156.html
if its a structural piece theres always Coosa as well, stringers or bulkheads.
http://www.fibreglast.com/showproduc...sFoam-156.html
if its a structural piece theres always Coosa as well, stringers or bulkheads.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 02-05-2008 at 12:44 AM.
02-05-2008, 06:34 AM
#3
VIP Member
VIP Member
about half way down this page are some poly foam sheets that shape easy and can be glassed over. I have a local industrial insulation warehouse that can get me the exact same thing quite a bit cheaper, you may want to check with some of the suppliers in your area. What are you working on?
http://www.fibreglast.com/showproduc...sFoam-156.html
if its a structural piece theres always Coosa as well, stringers or bulkheads.
http://www.fibreglast.com/showproduc...sFoam-156.html
if its a structural piece theres always Coosa as well, stringers or bulkheads.
awwwwwwww you said coosa!
02-05-2008, 07:17 AM
#4
Charter Member #232
Charter Member
I have taken 2 part foam and poured it in a box, let it expand and dry and then used that to make parts. Works very well.
__________________
Put your best foot forward!
Put your best foot forward!
02-05-2008, 09:43 AM
#5
Rock on!! . . Its a Coosa nation!! 
Should i use it on the transom of your Ciggy?
Should i use it on the transom of your Ciggy?
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
02-05-2008, 11:02 AM
#6
A to Z
Platinum Member
02-05-2008, 12:51 PM
#7
what a hack! . . . .
Hang'em what are you building?
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
02-05-2008, 02:23 PM
#8
Easily Distracted
Platinum Member
