Clear coat
#1
Pirate of the Chesapeake
Gold Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: North Point Creek, Md.
Posts: 4,330
Likes: 0
Received 0 Likes
on
0 Posts
Clear coat
My 202 stinger is red. The topside is always getting chalkie.I have to buff it all the time.Could Iwet sand it with lets say 800 grit and then clear coat it with emron or some other kind of clear. Thanks JOHN
#2
Registered
#3
be careful when just laying clear over gel, especially red. I have seen it still fade through the clear than your really screwed. As long as its prepped how hard is it to lay on a few coats of a uv stabilized basecoat color? Sand it with no finer than 400 and use an adheasion promotor like Bulldog from SEM. Dust a few coats of color (PPG's DBC) than clear with PPG's DCU-2021 or similar.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )