Custom Dash
03-01-2010, 08:20 PM
#2
Registered
Join Date: Jul 2008
Location: Chagrin Falls, Ohio
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
I had my dash upgraded last year. It turned out great. It went from black faded out dash pieces to this brand new updated look.
I can put you in touch with the guy who did my dash if your interested. All you would need to do is send him the dash pieces.
I can put you in touch with the guy who did my dash if your interested. All you would need to do is send him the dash pieces.
03-05-2010, 12:42 PM
#3
VP of the tickfaw200
did my layout my self then had it cut by a computer ran plasma torch ran by aouto cad. took the speedo out going to use the gps and put a smaller tach for the gps to fit.
did the glove box also cut that with a band saw
the panals are alum. they were swirld by a grinder and yellow lime candy over the raw alum. makes it realy pop in the sun and the other stuff looks like its floting in the panals from the depth the candy gave it.the eye was painted and the tribe stuff was airbrushed with purple and has purple flake in it.
Last edited by caseyh; 03-05-2010 at 12:45 PM.
03-05-2010, 01:25 PM
#4
Registered
Gold Member
03-07-2010, 09:28 PM
#7
Crazy Energy
Platinum Member
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
The print shop that printed the carbon fiber on the vinyl did the Velocity and trim and tabs too, they printed the carbon then printed over it with Velocity, drive and trim..
