Go Back  Offshoreonly.com > Technical > Fiberglass and Paint
removing resin drops.....im a slob! >

removing resin drops.....im a slob!

Notices

removing resin drops.....im a slob!

Old 06-25-2013, 10:12 AM
  #1  
Registered
Thread Starter
iTrader: (5)
 
Join Date: Aug 2010
Location: MA
Posts: 2,535
Likes: 0
Received 0 Likes on 0 Posts
Default removing resin drops.....im a slob!

Did a cpl repairs on a boat & now I'm noticing some resin thats on the non skid platform. It's ground in pretty good & dirty.
Any magic tricks to getting these off?
scarab63 is offline  
Old 06-25-2013, 11:06 AM
  #2  
Registered
 
Join Date: Jun 2006
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

Take a little sharp chisel and tap out, most of the time they will pop right up without damaging anything
Ktrain is offline  
Old 06-25-2013, 11:29 AM
  #3  
Registered
Thread Starter
iTrader: (5)
 
Join Date: Aug 2010
Location: MA
Posts: 2,535
Likes: 0
Received 0 Likes on 0 Posts
Default

It's not raised anymore, but rather ground in with dirt / $hit mixed in
scarab63 is offline  
Old 06-25-2013, 03:30 PM
  #4  
Registered
 
Join Date: Jun 2006
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

Ur screwed.
Ktrain is offline  
Old 06-25-2013, 09:30 PM
  #5  
Registered
Thread Starter
iTrader: (5)
 
Join Date: Aug 2010
Location: MA
Posts: 2,535
Likes: 0
Received 0 Likes on 0 Posts
Default

Lol
I've tried steam powerwash. Tuff stuff, bleach, raping it with the side edge of the buffer.
I know someone has some secret potion!!!
?
scarab63 is offline  
Old 06-26-2013, 12:44 AM
  #6  
Registered
iTrader: (2)
 
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like on 1 Post
Default fixx

super X non chlornated brake cleaner and a fine scrub brush,,get it on quick scrub quick and wipe it off quick..it works! acitone will also work but is a little stronger..
FIXX is offline  
Old 07-01-2013, 02:24 PM
  #7  
Registered
Thread Starter
iTrader: (5)
 
Join Date: Aug 2010
Location: MA
Posts: 2,535
Likes: 0
Received 0 Likes on 0 Posts
Default

Acetone was a no go....
Gasoline maybe. It looks like a dozen bird shats on the platform! Nfg
scarab63 is offline  
Old 07-01-2013, 06:30 PM
  #8  
Registered
 
Join Date: Jun 2006
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

It's not going to come up, unless u chip it.... At least I have found nothing that works
Ktrain is offline  
Old 07-01-2013, 06:45 PM
  #9  
Registered
 
Join Date: Jul 2008
Location: Lk. st. Clair MI
Posts: 4,498
Likes: 0
Received 1 Like on 1 Post
Default

Scrape it with a razor blade. Keep it at a 90° angle or you will **** it up. Then hit it with 2000# and rub it. Megires stones work well too...
POWERPLAY J is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.