Refinishing drives
#1
Registered
Thread Starter
Join Date: Jul 2014
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Refinishing drives
I have a pair of bravos I'm going to repaint and epoxy a new nosecone on they do have a little pitting on the gimble rings what is the best product to use for filling those Pitts. I have heard many products looking for the longest lasting.
#3
Registered
iTrader: (2)
Sandblast , spray PPG DP Epoxy , you can use Evercoat metal to metal to fair in the nose cone , spray 2 coats let dry for a day and sand with 320/400 use PPG Concept single stage as for the ring same thing but just spray epoxy 2 coats and sand you cut through or didn't fill pits spray 2 more coats till smooth and no cut throughs