replacing main stringer and transom
#21
Registered
Platinum Member
Thread Starter
#22
Registered
iTrader: (3)
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 6 Likes
on
6 Posts
The manifold in the gimbal for the trim lines was damaged so I moved the lines to thru-hull fittings instead. these will go away with the new drive configurations.
#24
Registered
good luck, your going to need it... lol
there will be a point about 1/2 way in where you realize you have to be out of your mind to do this hahaha... its really the fact of having no experience and having to learn all sorts of techniques and stuff along the way that make it so time consuming. If i did it again it would go a lot faster but im not sure i would lol.
there will be a point about 1/2 way in where you realize you have to be out of your mind to do this hahaha... its really the fact of having no experience and having to learn all sorts of techniques and stuff along the way that make it so time consuming. If i did it again it would go a lot faster but im not sure i would lol.
#27
Registered
Platinum Member
Thread Starter
thanks for comment LEE
dave seems to have alot ...alot of knowledge about go fast boats...was at his shop yesterday for several hours..chatting with him.
..flash.........out
dave seems to have alot ...alot of knowledge about go fast boats...was at his shop yesterday for several hours..chatting with him.
..flash.........out
Last edited by flashgordon; 05-11-2015 at 07:46 AM. Reason: speeling
#28
Does Dave still have the old canopy race boat sitting outside there? I seem to remember an old experimental split V thing he did back in the day as well. Take shop pics
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#29
Registered
Platinum Member
Thread Starter
hey,,,dave,,,
he has his class A-30 hull sitting outside,,said he quitting racing it when they did away with that class,,u would know more about that than me...
also got a crazy looking twin cantopy looking boat sitting out there..
he had a 16/17 donzi ,,hanging in his spray booth,,,redoing bottom cracks,,,
lots of stuff..3/4 old 24-26 ft boats sitting outside..
he has his class A-30 hull sitting outside,,said he quitting racing it when they did away with that class,,u would know more about that than me...
also got a crazy looking twin cantopy looking boat sitting out there..
he had a 16/17 donzi ,,hanging in his spray booth,,,redoing bottom cracks,,,
lots of stuff..3/4 old 24-26 ft boats sitting outside..
#30
Registered
Platinum Member
Thread Starter
[ATTACH=CONFIG]542334[/ATTACH]
[ATTACH=CONFIG]542335[/ATTACH]
[ATTACH=CONFIG]542336[/ATTACH]
latest photos almost done!!!!!!!!!!!
[ATTACH=CONFIG]542335[/ATTACH]
[ATTACH=CONFIG]542336[/ATTACH]
latest photos almost done!!!!!!!!!!!