making nidacore sandwhich
#1
making nidacore sandwhich
so 2 pieces nidacore 78 x 3 inches,
i used 2 pieces of 1708, first layer went mat side down on nidacore ( nida took a little resin as well )
second piece of 1708 went mat side up
then second piece of nidacore went down
everything was lined up along a straight edge, stood up and clamped between a couple of 2x4's
anyone think i should've done something different?
the other thing is i don't know if the nida has any strength in the upright position ( like a beam ) if not i have an idea on the back burner
[ATTACH=CONFIG]562592[/ATTACH][ATTACH=CONFIG]562593[/ATTACH][ATTACH=CONFIG]562594[/ATTACH][ATTACH=CONFIG]562595[/ATTACH]
thanks for any input.
then sometimes pics come up as pics and sometimes the come up as attachments, how do ya make them always come up as pics ?
i used 2 pieces of 1708, first layer went mat side down on nidacore ( nida took a little resin as well )
second piece of 1708 went mat side up
then second piece of nidacore went down
everything was lined up along a straight edge, stood up and clamped between a couple of 2x4's
anyone think i should've done something different?
the other thing is i don't know if the nida has any strength in the upright position ( like a beam ) if not i have an idea on the back burner
[ATTACH=CONFIG]562592[/ATTACH][ATTACH=CONFIG]562593[/ATTACH][ATTACH=CONFIG]562594[/ATTACH][ATTACH=CONFIG]562595[/ATTACH]
thanks for any input.
then sometimes pics come up as pics and sometimes the come up as attachments, how do ya make them always come up as pics ?
Last edited by outonsafari; 12-11-2016 at 04:42 PM.
#2
[ATTACH=CONFIG]562596[/ATTACH][ATTACH=CONFIG]562597[/ATTACH][ATTACH=CONFIG]562598[/ATTACH][ATTACH=CONFIG]562599[/ATTACH]
i think i got it
https://www.youtube.com/watch?v=LSr_3E7VWmo
sandwich, not sandwhich,
https://www.youtube.com/watch?v=FaZSW6zWJbE
i think i got it
https://www.youtube.com/watch?v=LSr_3E7VWmo
sandwich, not sandwhich,
https://www.youtube.com/watch?v=FaZSW6zWJbE
Last edited by outonsafari; 12-11-2016 at 05:32 PM.