357 guys, cabin floor pics!!!

[Boomer35]

As of now i have no floor in the cabin, im looking for some pics to give me some ideas, should i do a snap in carpet or just staple it right to the floor i make, is there a little door to still reach the bilge right under the door?>? PICS PICS PICS

[Boomer35]

notta?

[Boomer35]

building tomorrow, going off nothing, anybody got anything, is there a step, whats the deal with the floor down there!!!

[jeff32]

what do you mean ? No floor? I can take pictures of mine even though it is stripped, but can't see what you are looking for exactly!

[Boomer35]

im assuming there must be some sort of floor that goes over the hull or fiberglass bilge area, wondering what it looked like, if there was a step over the bilge, or how low it is from the couch ledge

[jeff32]

so you mean where you walk in the cabin it's in V shape right? No flat floor?

[375stinger]

boomer slow down....dont go building yet..noone even knows what ur tlaking about....what you mean NO floor?

[Boomer35]

yea, if you walk in the cabin, there is a bilge right under the door, then in my case, it goes right down to the white fiberglass, im thinking from the way the carpet doesnt go all the way down the side, there must have been a floor there, Jeff, is your floor in?

[375stinger]

do you have any pictures? is their a cabin in your boat already? is the area unfinished without fiberglass between yur cabin and the door from the cockpit leading to the cabin? why is it not finished? areyou saying there is absolutely nooo floor there and you can seethe hull, stringers etc?

[jeff32]

Boomer. I see what you mean now. I'll take pictures of mine. In fact there is a step, made out of white kind of composite/plastic thing. The top of the step can be opened since there are hinges on it, so you have access to bilge where a bilge pump is installed and the hose for overflow from the a/c ends. I'll send you pictures before the end of the day...