Anyone have a microwave in a 382????
#21
21 and 42 footers
Platinum Member
Thread Starter
Pulls made with all accessories turning....seawater pump to my CMI's (wet) by Precision Marine so these numbers are just as they sit in my boat. (supposedly he makes conservative pulls)
630HP at 5,100 rpms
700ft/torque at 4,300 rpms!!!
Can't wait to see what she does on the water!!!
630HP at 5,100 rpms
700ft/torque at 4,300 rpms!!!
Can't wait to see what she does on the water!!!
#23
21 and 42 footers
Platinum Member
Thread Starter
#24
Registered
iTrader: (3)
Pulls made with all accessories turning....seawater pump to my CMI's (wet) by Precision Marine so these numbers are just as they sit in my boat. (supposedly he makes conservative pulls)
630HP at 5,100 rpms
700ft/torque at 4,300 rpms!!!
Can't wait to see what she does on the water!!!
630HP at 5,100 rpms
700ft/torque at 4,300 rpms!!!
Can't wait to see what she does on the water!!!
#25
Registered
iTrader: (3)
Done, but I made an entirely new panel from 1/2" plexiglas since the hole was not the right size or shape. I hinged the TV/DVD from the bottom rather than the top. I also used the 1/2 plexi for the electrical cabinet door. Gained TONS of storage room where the old monster TV/VCR used to live.
#27
21 and 42 footers
Platinum Member
Thread Starter
That looks GOOD!!! I got the boat out for first runs yesterday......computers are way too rich and didn't have the right props but still saw 78. Getting everything dialed in should get her over 80 easy.