1995 Sr-271 Seat Removal
#1
Registered
Thread Starter
Join Date: Jul 2007
Location: Cape Coral, FL
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
1995 Sr-271 Seat Removal
How Does The Rear Seat Come Out. I See The Bolts In The Engine Compartment That Come Thought, But Not Sure If There Are Any Other Hidden Ones Along The Side. Any Help Would Be Greatly Appreciated.
Thanks In Advance.
Thanks In Advance.
#2
Its a tough job, the sides are bolted in. You need to remove the grab handles and the trim panels under the grab handle. Then reach inside the side compartment with a offset ratchet screw driver and a big Phillips bit there is a few screws on each side. Then remove the cup holder/ step in the arm rest and I think there is a few screws in there to. The seat fits tight and is not easy to get in and out, if its wet and soaked with water you will need a helper
Thread
Thread Starter
Forum
Replies
Last Post
stankgilr
General Boating Discussion
43
06-20-2008 08:45 PM