336 SR1 prop question
#11
Registered
Thread Starter
Join Date: Feb 2008
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
336
260 724 1412 I have the build sheet from innovations and these motors dyno sheet shows 600 hp at the prop. So many people these days want to steel everything but I don't need to sell so I will wait. Like I said the last owner had over 140,000 in the boat, this thing is cleaner than new. I just lifted the motors and waxed the bottom of them.
#13
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
mrfixxall
Hey fast!!!
what is the colors of your boat and what year !!!
did yo jsut get it?
my understanding is Fomula made only 5 in 1995 with 525sc's
mine was the first and was featured in powerboat mag, and won offshore boat of the year.
I bought it in Lake mead ( Vegas) 2 years ago
I am in holland Michigan
I have 4 blade bravos ( 24) labbed with 1.36 drive ratio
I see 75 on speedo at 5100 rpm
I want to try 3 baldes as that was what was on the baot during the PB sea trials.
my crusie is awesome at 50mph at 3100-3200 so I am not sure what I would loose in cruise with the 3 blades.....
I understand from our local formula expert in town ( ownes a lingenfelter kevlar 382) that shortie drives really make the 336 scoot !!!!
I hope to try some 3 blade 25's thsi season
Ramb
what is the colors of your boat and what year !!!
did yo jsut get it?
my understanding is Fomula made only 5 in 1995 with 525sc's
mine was the first and was featured in powerboat mag, and won offshore boat of the year.
I bought it in Lake mead ( Vegas) 2 years ago
I am in holland Michigan
I have 4 blade bravos ( 24) labbed with 1.36 drive ratio
I see 75 on speedo at 5100 rpm
I want to try 3 baldes as that was what was on the baot during the PB sea trials.
my crusie is awesome at 50mph at 3100-3200 so I am not sure what I would loose in cruise with the 3 blades.....
I understand from our local formula expert in town ( ownes a lingenfelter kevlar 382) that shortie drives really make the 336 scoot !!!!
I hope to try some 3 blade 25's thsi season
Ramb
#14
Registered
out
have not tried in
turning out is by far the most common for deep x dimensions
not sure what in would do on the 336. I tried in with my 272 with 3 blades once and the boat was real squirly. did not feel stable at all and i did not see any speed gain.
Ramb
have not tried in
turning out is by far the most common for deep x dimensions
not sure what in would do on the 336. I tried in with my 272 with 3 blades once and the boat was real squirly. did not feel stable at all and i did not see any speed gain.
Ramb
#16
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
mrfixxall
i was courous, i was talking to a guy that turned his bravo props inward because the boat porpised way to much.. he he said that the boat would almost leave the water it was so bad.
496 ho with x drives,said it ran 72mph on gps and handled alot better spinning inwards..