Need advice on deck hatch...
#1
Registered
Thread Starter
Join Date: Aug 2007
Location: Long Island, NY
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Need advice on deck hatch...
Hey guys,
I need to replace the deck hatch on my 1986 242-LS. Do I need to buy one directy from Formula, or will an aftermarket one bolt up? I need to measure it, to see if the universal ones they sell are the same size. Any advice is appreciated. Thanks!
I need to replace the deck hatch on my 1986 242-LS. Do I need to buy one directy from Formula, or will an aftermarket one bolt up? I need to measure it, to see if the universal ones they sell are the same size. Any advice is appreciated. Thanks!
#2
Where To
VIP Member
Join Date: Nov 2001
Location: Alexandria Bay, NY 1000 Islands
Posts: 2,517
Likes: 0
Received 3 Likes
on
3 Posts
You can still get parts for most of the earlier hatches, depending on what you need. I think it's a Bomar Hatch.
Try Jamestown Distributors at
http://www.jamestowndistributors.com...=GRID&history=
Dave
Try Jamestown Distributors at
http://www.jamestowndistributors.com...=GRID&history=
Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
Air, Sea, and Land...Exploring the planet in 3-D!
#7
Registered
Join Date: Jan 2006
Location: Phoenix, AZ
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
check your old hatch for a serial number, then call pompanette customer service. They should be able to give you the correct hatch model. I just went through this to replace the lexan in my front hatch.