Repower 311-SR1 1989
06-09-2010, 11:58 AM
#11
VIP Member
VIP Member
My Hp 500's can be run on the engine cradle they are kept on, just need a 5 gal can of gas and battery. These are not rust buckets either. The price is right to eliminate haggling. These are kept as my spares for my boat, so they are ready to run
Blocks are 1996 when the boat was new, I think that makes them Gen IV ??
Blocks are 1996 when the boat was new, I think that makes them Gen IV ??
06-09-2010, 04:33 PM
#12
Registered
Thread Starter
Join Date: Nov 2008
Location: The Netherlands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Paul,
I have a pair of turn key Hp 500's Gen IV blocks, low hours ( less than 100) on freshen up
$ 13,000.00 USD for the pair. These are spare for my 382, currently using SC 600's in the boat
I can send pics & specs if you are interested. Engines are loacted in Virginia near Wasington DC
I have a pair of turn key Hp 500's Gen IV blocks, low hours ( less than 100) on freshen up
$ 13,000.00 USD for the pair. These are spare for my 382, currently using SC 600's in the boat
I can send pics & specs if you are interested. Engines are loacted in Virginia near Wasington DC
James,
Sure I am interested. Please email me the specs and some pics: [email protected]
Thanks in advance.
06-09-2010, 04:38 PM
#13
Registered
Thread Starter
Join Date: Nov 2008
Location: The Netherlands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
My Hp 500's can be run on the engine cradle they are kept on, just need a 5 gal can of gas and battery. These are not rust buckets either. The price is right to eliminate haggling. These are kept as my spares for my boat, so they are ready to run
Blocks are 1996 when the boat was new, I think that makes them Gen IV ??
Blocks are 1996 when the boat was new, I think that makes them Gen IV ??
Please email me some more info.
As far as shipment goes, it should be possible to arrange a pick-up shipment, alternatively I could contact a business partner in Ford Meyrs to arrange.
06-09-2010, 05:09 PM
#14
Registered
Thread Starter
Join Date: Nov 2008
Location: The Netherlands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Hey Paul ......buy my 311 ....600HP ..new drives ...Hydraulic steering .....
Sell your boat without motors .....or swap my motors to your boat and sell my boat ......
http://sports.webshots.com/album/577...sports&start=0
Sell your boat without motors .....or swap my motors to your boat and sell my boat ......
http://sports.webshots.com/album/577...sports&start=0
That kind of power in any type of boat is extremely rare over here. One German guy is boating with a Nortec equipped with turbines but I guess he is the only one in europe so far.
It is a pitty it is such a hassle to ship a boat , costs, VAT, import duty and whatvever they can find to charge you.
In this case I would sell my boat without power.
I will also investigate what is involved when shipping a boat to the Netherlands.
06-09-2010, 06:45 PM
#15
...I'm not telling you anything you dont know but it draws attention everywhere we go ....m
06-10-2010, 05:57 AM
#16
Registered
Join Date: Aug 2002
Location: Eastern Lake Ontario
Posts: 2,896
Likes: 0
Received 3 Likes
on
3 Posts
35 is not a bad price for your boat, you should be able to get that. If I were really looking, I'd be on a plane to Fla. right now!! Fact is though, my next boat will be a cruiser. Just can't stand the thought of wallowing around in a big, bulbus tub but I want more room and hang space.
06-15-2010, 01:14 PM
#19
Registered
Thread Starter
Join Date: Nov 2008
Location: The Netherlands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
If I would go for the HP500's from James, what implication would that have on the prop's?
I am running the standard prop's which came with the boat, Mirage Plus, 3 blades. My engines were running 5000-5100rpm WOT. I assume something needs to change with the HP500's.
Does anyone have some experience with this combination of boat and power?
I am running the standard prop's which came with the boat, Mirage Plus, 3 blades. My engines were running 5000-5100rpm WOT. I assume something needs to change with the HP500's.
Does anyone have some experience with this combination of boat and power?
06-15-2010, 01:18 PM
#20
Charter Member
I just put HP500 EFI's in my 89 311 and I am banging the rev limiter with 26P Bravo 1 four blades with a full tank and three people. I have a set of 28's I'm gonna try next and see what happens, any luck I may be able to spin 30's, but 28 four blades are probably going to be about right.
